As a manufacturer of polypropylene products we have a responsibility to operate in a safe and reliable manner. We will manage our production and services to ensure that:
The health and safety of employees, contractors, customers, and the public is of highest importance with everything we do
We protect the environment of communities in which we operate
We maintain an open and positive relationship with our stakeholders
We strive for full compliance and continuous improvement in our Responsible Care, HSE Management, Environmental Management and Quality Management programs to deliver excellent business results and build a positive relationship with our stakeholders
We aim to:
Maintain a healthy workplace and eliminate work related injuries
Protect people, property, and all elements of the surrounding environment by minimizing the impact of our activities through efficient and safe operations
Deliver upon expectations of our internal and external stakeholders
Maintain our position as an industry leader through innovation, continuous improvement, and knowledge growth
HSE Management System
The HMC Polymers’ Health, Safety, and Environmental Management System defines and monitors the performance of our management and staff to ensure all employees understand the requirements and respond effectively to safeguard the health and safety of our stakeholders, the community and our colleagues.
We are individually accountable for our actions and results, and we take HSE management seriously. As committed stewards we will do our best to act responsibly in everything that we do.
We communicate openly with all stakeholders on health, safety and environmental issues and provide workplace policies, standards, procedures and training to enable employees and contractors to perform their jobs in a safe, healthy and environmentally responsible manner.
Full compliance with all applicable laws and regulations is a fundamental corporate practice, or where appropriate, the application of a relevant company standard if more stringent.
At HMC Polymers, we believe that zero TRC (injuries and process incidents) is attainable and that is always our goal. We are committed to continuous improvement based on sound science, risk assessment and benefit analysis, and to measure, audit and communicate our performance honestly to all stakeholders.
Environment Management System
HMC Polymers has established an Environment Management System (EMS) to manage its environmental programs in a comprehensive, systematic, and documented manner. The EMS enables HMC Polymers to establish and assess the effectiveness of procedures, and to set an environmental policy with clear and measurable objectives.
Reporting Period: 2Q 2012
1. Personal Safety
Total Recordable Cases (TRC) per million working hours
Total work hours lost = 0
(Contractors TRI included)
(Reported annually - 2011)
Energy (Electrical + Steam)
Energy required to produce per tonne of PP = 2022 MJ/Ton
Total = 1.003 Million Giga Joules
3. PP Plant - Map Ta Phut
0.71 ton/ton of PP product
1.65 m3/ton of PP product
0.0001 ton/ton of PP product
118.21 tons (includes Hz and Non-Hz waste)
4. PDH Plant - Map Ta Phut
0.0244 tons/ton of PDH product
10.28 tons/ton of PDH product
7.78 m3/ton of PDH product
0.000077 tons/ton of PDH product
2.1 tons (includes Hz and Non-Hz waste)
HSE Reporting – Definitions
Total Recordable Cases (TRC)
Accidents resulting in absence from work, or the requirement to do a different type of work, or any other case in which medical treatment is required. The frequency is calculated as the number of accidents per million working hours. HMC Polymers’ employees and also contractors working on company premises are included in the TRC calculation.
Consumption of all energy vectors (i.e. fuels, electricity and steam). Electricity and steam are converted into primary energy with standard conversion factors of 40% (electricity) and 90% (steam).
Direct Carbon Dioxide CO2 Emissions
CO2 emissions from stationary sources on company premises, including emissions from fuel consumption, combustion of other hydrocarbon streams as well as flaring.
Volatile Organic Compound (VOC) Emissions
Emissions of all organic compounds (from C1 to Cn) with a vapour pressure of 0.01 kPa or more, at either room temperature or at actual temperature when processed. The quantification is based on measurements and estimates.
Nitrogen Oxide (NOx) Emissions
Emissions of all nitrogen oxides from all relevant sources, including flares. The emissions are quantified as NO2. When NOx measurements are not done, emission factors correlated to the fuel type and heating value are used.
Total amount of fresh water withdrawn from surface or groundwater sources for any type of usage (e.g. cooling, steam generation, cleaning, sanitary use).
The Chemical Oxygen Demand – a measure of water pollution. It is the amount of oxygen needed for chemical oxidation of contaminants in wastewater.
Generation of all waste at HMC Polymers’ company locations during normal operations as well as during special projects. Any substance or object that is to be discarded is included in the definition of waste. Exceptions are atmospheric emissions, liquid effluents and by-products with commercial value.
Responsible Care is the chemical industry’s global voluntary initiative under which companies, through their national associations work together to continuously improve their health, safety and environmental performance, and to communicate with stakeholders about their products and processes.
HMC Polymers is an original member of the initiative and has established a Responsible Care program in Thailand under the Petrochemical Industry Club, Federation of Thai Industries (FTIPC).
The Responsible Care initiative assists our industry to optimize safety and act with care for generations to come. Responsible Care was commended by the United Nations Environment Program (UNEP) as making a significant contribution to sustainability at the World Summit on Sustainability in 2002.
Responsible Care membership requires a corporate commitment to uphold the following operating elements:
Measuring and publicly reporting performance
Implementing the Responsible Care Security Code
Applying the modern Responsible Care management system to achieve and verify results
Obtaining independent certification that a management system is in place and functions according to professional standards
At HMC Polymers, Responsible Care is a cornerstone part of our HSE operating policy. While we take pride in results already achieved, we continue to strive toward performance improvements in all areas of health, safety and the environment.
ISO 9001:2008 (Expiry 23 July 2014) download
ISO 14001:2004 (Expiry 31 October 2014) download